ISSN: 2168-9717

Tecnología de ingeniería arquitectónica

Acceso abierto

Nuestro grupo organiza más de 3000 Series de conferencias Eventos cada año en EE. UU., Europa y América. Asia con el apoyo de 1.000 sociedades científicas más y publica más de 700 Acceso abierto Revistas que contienen más de 50.000 personalidades eminentes, científicos de renombre como miembros del consejo editorial.

Revistas de acceso abierto que ganan más lectores y citas
700 revistas y 15 000 000 de lectores Cada revista obtiene más de 25 000 lectores

Indexado en
  • Índice Copérnico
  • Google Académico
  • sherpa romeo
  • Abrir puerta J
  • Revista GenámicaBuscar
  • Claves Académicas
  • Biblioteca de revistas electrónicas
  • Búsqueda de referencia
  • Universidad Hamdard
  • EBSCO AZ
  • OCLC-WorldCat
  • Catálogo en línea SWB
  • Biblioteca Virtual de Biología (vifabio)
  • publones
  • Pub Europeo
Comparte esta página

Abstracto

Behaviour of Double Skinned Composite Columns with Concrete Filled Tubular Columns

Hasan Hastemoglu

This paper comprises of the experimental study of five (5) double skinned concrete filled steel tubular (DSCFT ) columns of concentrically placed circular sections filled with self-compacting concrete (SCC). Tests on the specimens were made by applying axial loads. The main experimental parameter varied for columns were slenderness ratio. The test results of DSCFT columns are compared with another five (5) concrete filled tube (CFT) columns of same area of steel (Ast) and outer diameter as in DSCFT columns. Both filled with self-compacting concrete of grade M50. Testing of specimens investigates the behaviour on load deflection, confinement effect, and the strength of the columns. Various characteristics such as stiffness, ductility and failure mode are also discussed with the help of load deflection curves. The comparison with concrete filled tube (CFT) to the double skinned concrete filled tube (DSCFT) columns likely to be show that DSCFT columns are similar to CFT columns in performance and DSCFT shows better in cost concern than CFT. Theoretical analysis was also done and compared with the experimental results. Comparison of various codes like (EC4, LRFD, ACI) was also done. The results reveal that EC4 is better predictable than others).

An ANSYS modelling was also done for two specimens to calibrate the test results obtained from experiments. The results from the experimental study were compared with the ANSYS results. The result shows that there is little difference in deformations between the ANSYS and experimental results.

Descargo de responsabilidad: este resumen se tradujo utilizando herramientas de inteligencia artificial y aún no ha sido revisado ni verificado.