Nuestro grupo organiza más de 3000 Series de conferencias Eventos cada año en EE. UU., Europa y América. Asia con el apoyo de 1.000 sociedades científicas más y publica más de 700 Acceso abierto Revistas que contienen más de 50.000 personalidades eminentes, científicos de renombre como miembros del consejo editorial.

Revistas de acceso abierto que ganan más lectores y citas
700 revistas y 15 000 000 de lectores Cada revista obtiene más de 25 000 lectores

Abstracto

Cotton and Caricaceae Seeds, as Potential Feedstock for Biodiesel Production

Azhari Muhammad Syam

Statement of the Problem: The cotton and caricaceae are common crops in the tropical countries. The crop seed in general is as domestic waste. However, mostly the people use it as seedlings. On the other hand, the production of fossil based oil takes place a declining quantity year by year. To anticipate the energy crisis occurs in the future, a new resource of fuel needs to be invented [1]. The purpose of this study is to extract the oil from the seed of crop such as cotton and caricaceae via chemical solvent extraction process. Thus, the extracted oils are used as the feedstock of biodiesel [2]. Methodology & Theoretical Orientation: A nonpolar chemical solvent is applied by immersing the crushed seed for a few hours which is treated with a heating source [3]. Then, the oils are further treated via acid esterification process under various specified parameters, if the oils are high content of impurities (free fatty acid), namely, it is more than 1.0% w/w. Finally, the esterified oil is used to produce biodiesel through alkali catalyzed transesterification under the specified variables [4]. Findings: The extracted oils indicate that the content of unsaturated hydrocarbon compounds is high. It is very useful used as feedstock of alternative fuel (biodiesel) which is applied in a low climate region (Figure 1) Conclusion & Significance: The cotton and caricaceae based biodiesel is as the potential alternative fuel due to the whole its characterization meets the values of standard of ASTM D 6751 [5].